EWS850-FIT 802.11ax 2×2 Dual-Band Managed Outdoor Wireless Access Point

EWS850-FIT

Product Highlight

EnGenius Fit6 2×2 Managed Outdoor Wireless Access Point brings Wi-Fi 6 to your outdoor space with lightning speeds of up to 574 Mbps/2.4 GHz and 1,200 Mbps/5GHz for unparalleled performance. Its IP67 weatherproof housing provides a safe haven from the elements while its high gain antenna ensures that you remain connected in even the most remote locations without sacrificing security thanks to WPA3/WPA2-PSK (AES) encryption capabilities.

  • Dual concurrent 802.11ax architecture and backward compatible with ac/a/b/g/n client devices.
  • 360° omni-directional antennas to achieve comprehensive coverage for networking cli-ent devices under a pervasive environment.
  • 5 dBi integrated 2×2 antenna
  • Supports up to 1,200 Mbps in the 5GHz frequency band & 574 Mbps in the 2.4GHz frequency band
  • 1x 2.5GE PoE+ port for flexible power options
  • Compliance with Proprietary 48V PoE Input for flexible installation and implementing remotely reset/reboot Access Point over 100 meters (328 feet).
  • Robust housing with IP67 enclosure rated to deploy at extremely weather.
  • WPA3 & WPA2-AES authentication support
  • Local and remote management over Fitcon controller without fees.

Technical Specifications

Standard

802.11a/b/g/n/ac/ax

Antenna

4 x 2.4 GHz: 5 dBi
4 x 5 GHz: 5 dBi

Physical Interface

1 x 10/100/1000/2500 BASE-T

LED Indicators

1 x Power
1 x LAN
1 x 2.4 GHz
1 x 5 GHz

Power Source

PoE 802.3af/at

Maximum Power Consumption

15.9W

Wireless & Radio Specifications

Operating Frequency

Dual-Radio Concurrent 2.4 GHz & 5 GHz

Operation Modes

Managed mode: AP, AP Mesh, Mesh

Frequency Radio

2.4 GHz: 2400 MHz ~ 2482 MHz
5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz

Transmit Power

Up to 23 dBm on 2.4 GHz
Up to 25 dBm on 5 GHz
(Maximum power is limited by regulatory domain)

Tx Beamforming (TxBF)

Radio Chains

2 × 2:2

SU-MIMO Capability

Two (2) spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate with HE40 bandwidth to a 2×2 wireless client device under the 2.4GHz radio.
Two (2) spatial stream Single User (SU) MIMO for up to 1,200 Mbps wireless data rate with VHT80 to a 2×2 wireless device under the 5GHz radio.

MU-MIMO Capability

Two (2) spatial streams Multiple (MU)-MIMO up to 1,200 Mbps wireless data rate for transmitting to two (2) streams MU-MIMO 11ax capable wireless client devices under 5GHz simultaneously.
Two (2) spatial streams Multiple (MU)-MIMO up to 574 Mbps wireless data rate for transmitting to two (2) streams MU-MIMO 11ax capable wireless client devices under 2.4GHz simultaneously.

Supported Data Rates (Mbps):

802.11ax:
2.4 GHz: 9 to 574 (MCS0 to MCS11, NSS = 1 to 2)
5 GHz: 18 to 1200 (MCS0 to MSC11, NSS = 1 to 2)
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 300 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)

Supported Radio Technologies

802.11ax: Orthogonal Frequency Division Multiple Access(OFDMA)
802.11a/g/n/ac: Orthogonal Frequency Division Multiple (OFDM)
802.11b: Direct-sequence spread-spectrum (DSSS)

Channelization

802.11ax supports high-efficiency throughput (HE) —HE 20/40/80 MHz
802.11ac supports very high throughput (VHT) —VHT 20/40/80 MHz
802.11n supports high throughput (HT) —HT 20/40 MHz
802.11n supports high throughput under the 2.4GHz radio –HT40 MHz (256-QAM)
802.11n/ac/ax packet aggregation: A-MPDU, A-SPDU

Supported Modulation

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11b: BPSK, QPSK, CCK

Max Concurrent User

128 per radio